Ditch Witch of Alabama

  • 2200 Corporate Woods Dr
  • Alabaster, AL 35007
  • Call Us: (205) 663-6794
  • https://www.ditchwitchal.com/
Print This Page

2024 American Augers Mud Pump P-600 3-1/2

Information

2024 American Augers Mud Pump P-600 3-1/2

Features may include:

  • Allows the operator to get enough flow to keep the bore flushed clean of cuttings
  • Designed with a compact skid mounting and provides a small footprint that is the ideal form for most drilling conditions
  • Compatible with any drill brand making it suitable for contractors operating a variety of sizes, makes and models of drilling equipment
  • New! Tri-plex 600GPM Pump with Rated Capacity of 600 US gallons (2,067 L) / minute
  • Caterpillar C-15 Tier III diesel engine
  • Stand-alone, self-powered and compatible with any drill brand
Product Option
  • Quiet-Pak® sound deadening enclosure

Photos

Highlights

  • Alabaster, Alabama
  • 2024
  • American Augers
  • Mud Pump P-600 3-1/2
  • Model: C-15 Tier III Diesel *Tier III or Tier 4i determined by country of purchase
  • Eaton-FRO-16210B, 10 Speed
  • Diesel
  • Available
  • 8 ft. (2.49 m)
  • 9 ft. (2.7 m)

Specifications

  • 2024
  • American Augers
  • Mud Pump
  • P-600 3-1/2
  • General
  • Model: C-15 Tier III Diesel *Tier III or Tier 4i determined by country of purchase
  • Caterpillar©
  • 475 HP (354 kW)
  • 2100 RPM
  • Mud motors offer the proven way to get acceptable penetration rates when drilling in hard formations and rock. The mud pump has to supply the mud motor, but also has to flush the cuttings to the surface for disposal. The table below shows typical flow rates for popular size mud motors. Be sure to allow enough extra mud flow to flood the bore. American Auger’s mud pumps can be used with any brand or size of the directional drill. | Mud motors offer the proven way to get acceptable penetration rates when drilling in hard formations and rock. The mud pump has to supply the mud motor, but also has to flush the cuttings to the surface for disposal. The table below shows typical flow rates for popular size mud motors. Be sure to allow enough extra mud flow to flood the bore. American Auger’s mud pumps can be used with any brand or size of a directional drill.
  • Diesel
  • Eaton-FRO-16210B, 10 Speed
  • 15.5 in. (394 mm) Twin Disk
  • Remote Controls: Mud Pump Throttle, Mud Pump Start/Stop, Clutch Actuator, Horn remote
  • (2) Deka 908DMF 12V,1450 CCA
  • Rating: 1 Meter Distance 104 dB(A) 3 Meter Distance 95 dB(A)
  • Design: Tri-plex 600GPM
  • 1,505psi (1043 bar)
  • Flow Rate: 75-200 GPM (283.9 - 605.7 LPM)
  • Mud Motor: 3-1/2 in (88.9 mm)
  • 6 in (152.4 mm)
  • 6 in (152.4 mm)
  • 20 ft. (6.096 m)
  • 9 ft. (2.7 m)
  • 8 ft. (2.49 m)
  • 300 U.S. Gallons (1,136 L)
  • Pump: 600 U.S.Gallons (2,067 L)/min.
  • Total: 29,800 lbs. (13,520 kg) estimated
  • Remote Instruments: Digital Mud Flow Meter (gallons/liters per minute)